点击图片查看大图
插卡感应改装成非接触式感应开锁
| 是否提供加工定制： | 是 | 型号： | FL815 | 机械钥匙： | 有机械钥匙 |
| 工作电压： | 6（V） | 品牌： | 方鑫 | 静态功耗： | 0.000018（W） |
| 安装要求： | 门厚4CM及以上 | 动态功耗： | 0.6（W） | 电池寿命： | 8640（h） |
| 欠压指示： | 灯光警示，di di报警声 |
Basic Technical Functional Index:
1.Adoptelectromagnetic wave, inductionis more sensitive.TI CMOS chipis imported from europe. 2.Power supply :use of 4 pieces of No 5 alkaline batteries.With low-voltage indication 5V.
3.Static power supply :<10uA
4.Dynamic Power Supply: About 200mA.
5.Lifetime of battery: For the allowed door open times, it normally can exceed 10,000 times.
6.Working temperature /Anti-static Electricity: --15'c --80'c /15000V.
7.Lack of voltage indication : 4.8 V , but for the door open it can exceed 150times.
8.Data check function: record inside lockof 239 latest information for checkinganytime .
9.Intelligent alarmindication: if the door still can't open aferusing the card to touch the lock,it will be in closed state automaticallywithin3seconds.If the door not be fully closed,the lock will alarm to indicate guest or waiter to close the door well.
Remark: the material we mainly used are copper,znic alloy,aluminium alloy and stainless steel drawbench. The lockbody of our lock is the best among the same line at presenet,Meanwhile ,we can design as our customers requirement
宁波市北仑方鑫自动化科技有限公司提供插卡感应改装成非接触式感应开锁，欢迎您的光临。